mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com revision: mztac011111g specifications are subject to change without notice. pg 1 of 2 m m z z t t a a c c s s e e r r i i e e s s c c e e r r a a m m i i c c r r e e s s o o n n a a t t o o r r ?? 5 package options ?? ceramic smd ?? rohs compliant schematic frequency mzta 2 lead part please consult with mmd sales department for any other parameters or options package case size cc = 7.4 x 3.4 x 1.8 cr = 4.5 x 2.0 x 1.2 cs = 4.7 x 4.1 x 1.5 cv = 3.7 x 3.1 x 1.5 cw = 2.5 x 2.0 x 1.2 mg = ic: tc4069ubp mt = ic: tc4069ubp m x = ic: tc74hcu04 schematic value added options blank = no added options t = tape & reel part number guide vdc: +5v ic ic rf = 1 m ohms c1 c2 c1 c2 (mg/mt): 30pf (mx) : 30pf (13.01 to 20.000 mhz) 15pf (20.01 to 25.999 mhz) 5pf (26.00 to 50.00 mhz) part number = mhz frequency range frequency accuracy temperature stability (-25c to +85c ) aging for 10 years mztacc mg 2.0 mhz to 8.00 mhz 0.5% 0.3% 0.3% mztacr mg 4.00 mhz to 8.00 mhz 0.5% 0.3% 0.3% mztacs mt 6.00 mhz to 13.00 mhz 0.5% 0.4% 0.3% mztacv mt 8.00 mhz to 13.00 mhz 0.5% 0.4% 0.3% mztacs mx 13.01 mhz to 50.00 mhz 0.5% 0.3% 0.3% mztacv mx 16.00 mhz to 50.00 mhz 0.5% 0.3% 0.3% mztacw mx 20.00 mhz to 50.00 mhz 0.5% 0.3% 0.3%
mmd monitor/quartztek 30400 esperanza, rancho santa margarita, ca, 92688 phone: (949) 709-5075, fax: (949) 709-3536, www.mmdcomp.com sales@mmdcomp.com revision: mztac011111g specifications are subject to change without notice. pg 2 of 2 package dimensions model l w h p t cs 4.70.2 4.10.2 1.50.2 0.80.2 3.90.2 cv 3.70.2 3.10.2 1.5 0.2 0.70.2 3.70.2 land pattern dimensions model t1 t2 w1 cs 0.80.2 3.90.2 5.10.2 cv 0.70.2 3.00.2 4.10.2 cc cs/cv cw cr 1 2 7.40 [0.29] 3.40 [0.13] 1.80 [0.07] 5.00 [0.20] 5.00 [0.20] 4.00 [0.16] 1.20 [0.05] 1.70 [0.07] pin1 = input pin2 = output suggested landing pattern 1.20 [0.05] 2.50 [0.10] 2.00 [0.08] 0.40 [0.02] 2.00 [0.08] pin1 = input pin2 = output suggested land pattern 1.00 [0.04] 2.00 [0.08] 0.50 [0.02] 2.60 [0.10] 12 t l p w h w1 t1 t2 pin1 = input pin2 = ground suggested land pattern
|
